Products

Product Features Terminal Type LC / UPC Type Duplex

This Maxxwave pigtail is an LC/UPC single mode 0.9mm 1 meter product. These pigtails are great for improving your cable management, and giving you ...

This Maxxwave pigtail is an LC/UPC single mode 1.25mm 1 meter product. These pigtails are great for improving your cable management, and giving you...

Maxxwave 2.4GHz 6dBi Omni-directional Mini Magnetic AntennaProduct Specifications: Frequency Range: 2.4-2.5GHz Cable: Low-Loss RG-316 1.5m (4.9’)...

Non-branded RB450 Series CaseNew Version - Now with offset brackets and clean front (no case screws)Shown with optional RB450(G), not included.Prod...

Non-Penetrating Roof Peak Tray Non-Penetrating roof mounts are designed to be used when you cannot mount/drill directly into the roof. Made with a...

Pole clamp for mounting enclosures - stainless steelFits a pole/mast up to 2.24inch in diameter. Band width 1/2inch.Made with pride in the USA!

This is the pipe clamp bracket system for the Maxxwave outdoor enclosures. Designed to fit up to a 2" diameter pipe.

RP-SMA Female Bulkhead to MMCX-Right Angle Pigtail, RG-178, 4 in/10cm, outdoor-rated.Material: Brass

N-Female Bulkhead to MMCX-Right Angle Pigtail, RG-316, 15cm, Outdoor.Comes with lock washer, rubber seal and nut

This Maxxwave pigtail is a great product to hoard, as you never know when you're going to need a pigtail. Very useful if you're setting up GPS ante...

SMA Female Bulkhead to U.FL Pigtail, RG-178, 4 in/10cm. Material: BrassComes with brass lock washer and nut

The Maxxwave MW-RA-USG was redesigned to fit the Ubiquiti USG perfectly. Sold in white or black powder coating.Mount your MikroTik RB/450 or Ubiqui...

Maxxwave N-Male to N-Male patch cable 3 feet (1 meter) high quality RFC240 outdoor-rated cable

Connect your Ubiquiti airMAX Products to Standard N Connector Antennas Made with high performance, high quality RG-58U outdoor rated cable. Exce...

Maxxwave Routermaxx Vengeance 3 Replacement Power Supply

The Maxxwave MW-APCSG SC/APC simplex adapter is capable of connecting to SC/APC type single mode connections.Product Features Terminal Type SC / A...

As optical passive devices, FS attenuators are mainly used in fiber optic to debug optical power performance & optical instrument calibration c...

This Maxxwave pigtail is an SC/APC single mode 1.25mm 1 meter product. These pigtails are great for improving your cable management, and giving you...

Product Features Terminal Type SC / UPC Type Simplex Mode Single Mode

This Maxxwave pigtail is an SC/UPC single mode 0.9mm 1 meter product. These pigtails are great for improving your cable management, and giving you ...

This is highly cost-effective way to connect two SFP/SFP+ devices for short distances, within racks or across adjacent racks. They provide a low po...

This is highly cost-effective way to connect two SFP/SFP+ devices for short distances, within racks or across adjacent racks. They provide a low po...

MW-SM-UPC-UPC-1M Maxxwave Single Mode Fiber Patch Cable - SC/UPC - SC/APC - 1 meter lengthProduct Features· A cost effective solution that provides...

The Maxxwave single-mode 10Gbit SFP+ fiber module enables uncompromised high-speed routing with our new fiber solutions. The modules are small-form...

The MW-1270+SM-20K is an up to 10.7Gbps Single Mode optical SFP+ module with a LC connector, 1270nm/1330nm DFB, that works for connections up to 20...

The MW-1330+SM-20K is an up to 10.7Gbps Single Mode optical SFP+ module 1330nm/1270nm DFB, that works for connections up to 20km.Compatible with Ma...

The new Maxxwave single-mode fiber module enable uncompromised high-speed routing with our new fiber solutions. The modules are small-form-factor p...

The new Maxxwave MW-1315-WDM-SM-PAIR is a pair of SFP fiber modules.The MW-1315-SM-US is a 1.25G Single Mode optical SFP module with a LC connector...

The MW-1513-SM-US is a 1.25G Single Mode optical SFP transceiver with an LC connector, TX1550nm/RX1310nm, which works for connections up to 20km an...

This is a spare key for the Maxxwave Wall Mount / Pole Mounted Cabinets (MW-PM6UO, and MW-PM12UO).Product Specifications Compatible with:      MW-P...

This is a set of keys for the Maxxwave Indoor Wall Mounted Cabinets (MW-WM6UIN and MW-WM12UIN).Product Specifications Compatible with:      MW-WM6U...

Broke that jumper cable during your Ubiquiti antenna installation? No problem, we have a spare one for you! The Maxxwave MW-IP67CA-RPSMA-30 RP-SM...

Colors may vary. These super-adhesive ABS plastic PCB stand-offs will make your MikroTik RouterBOARD or any other PCB mount to just about anywhere...

Enclosure for RB411 RB711 and RB433 series - Indoor/Outdoor - Case and Lid Only

MW-RM-Vengeance-3-INV is For the Maxxwave Vengeance 3 Router Chassis only.The Maxxwave Vengeance 3 is an advanced 1RU rackmount network appliance p...

Mount your Maxxwave Vengeance Mini with this 1U Rack Mount kit.Product Includes(2) Rack Mount ears(4) Screws

Keep your cables, surge protectors, and injectors safe outside.Product Features: Feed your cables through the bottom Mount on the wall Features ...

Keep your cables, surge protectors, and injectors safe outside.Product Features: Feed your cable through the bottom Mount on the wall Features a...

Maxxwave Y Heavy Duty Chimney Antenna Mount.Features Heavy Duty Antenna Mount 2-18" Straps Hardware

This product is a replacement for AC-MR-1-US This product usually ships within 3-5 business days.The Meraki 12V AC Adapter provides a quick and ea...