Skip to content
    Tycon Power 48V 240W DIN Rail Industrial Power Supply - TYCON Systems - (Dev) Baltic Networks

    Tycon Power 48V 240W DIN Rail Industrial Power Supply

    PSDIN-48-240W by TYCON Systems
    Sold out
    $123.95 - $123.95
    $123.95
    $123.95 - $123.95
    $123.95
    Extend Product Protection

    Tycon Power PSDIN Series of Industrial DIN Rail mount high efficiency switching power supplies operate over a wide temperature range of -40°C to +70°C. There are two models to supply 120W or 240W. The input is 90 to 264VAC auto-ranging with wire terminal connections. The output is 48VDC nominal with an adjustment range from 47VDC to 56VDC. There is a switch for single or parallel operation. Two 240W supplies operating in parallel will provide 480W total power. There is an alarm output to provide a dry contact closure to trigger an alarm if the DC output fails, like during a grid power failure. The relay is closed when DC output is normal and open when DC output is in fault condition due to overload or safety shutdown.


    Features
    • High Power and rugged design
    • Short Circuit, Over-Voltage, Over-current Protection
    • 90-264VAC Auto Ranging Input
    • 47~56VDC Adjustable Output
    • -40°C to +70°C Operating Temperature
    • Supports Parallel Operation
    • Dry Contact DC Alarm
    Applications
    • Powering PoE Switches
    • IP Phone and Security Camera Systems
    • Telecommunications
    Specifications
    • Input Operating Range: 90-264VAC ; 47-63Hz
    • Input In-rush Current: 35A Max
    • Input Current: 4.4A @ 115VAC ; 2.20A @ 230VAC
    • Output Voltage: 47~ 56VDC (adjustable)
    • Cont. Load Current: 5A
    • Maximum Output Power: 240W
    • Peak Power (10sec @ 220VAC): 360W
    • Line Regulation: ± 0.5%
    • Load Regulation: ± 1%
    • Voltage Overshoot: <5%
    • Ripple / Noise: 100mV Peak
    • Efficiency: 90% Minimum
    • Dielectric Strength: 1500V rms , 1 min, 10mA Max
    • Insulation Resistance: 10M Ohms
    • Protection: Short Circuit, Over-Voltage, Over-Current, Over Power
    • Alarm Output (“DC” and “OK”): 1A @ 30VDC, 0.5A @ 125VAC. DC OK = Closed, DC Fault = Open
    • Safety Standards: GB4943 / EN60950-1
    • EMI Standards: FCC PART 15 CLASS B, EN55022, EN55024
    • Harmonic Current: EN61000-3-2 Class D
    • EMS: EN61000-4-x Level 3&4
    • Operating Temp: -40°C to 70°C (-40°F to 158°F)
    • Operating Humidity: 5% to 95% non- condensing
    • Storage Temp: -40°C to 85°C (-40°F to 185°F)
    • MTBF: 200,000hrs
    • Altitude: 2000m (6562ft)
    • Vibration: 10-500Hz 2G 10min Sweep, 20G Surge 11ms
    • Case Size: 135 x 121 x 45mm (5.3 x 4.8 x 1.8”)
    • Weight: 0.77 Kg (1.7Lb)
    • Warranty: 3 Years
    Product Includes
    (1) Tycon Power DIN Rail Power Supply

    (1) User Manual