IgniteNet GLinq Indoor Cloud-Managed Gigabit Ethernet To Coax Bridge w/reverse power feed and integrated 2.4GHz Wi-FI

IgniteNet GLinq is a powerful ethernet over coax converter that enables service providers to deliver gigabit speeds via existing and new coax cabling infrastructure. The GLinq system is ideal for both providing bandwidth to buildings with outdoor coax as well as delivering gigabit speeds within buildings using existing coax cabling infrastructure. Operators can already easily deliver gigabit speeds to customers wirelessly using IgniteNet’s 60GHz MetroLinq products – now they can also easily share that delivered capacity throughout the whole building. The unique GLinq + MetroLinq combination provides a clean, simple, fast installation of gigabit connections. Both the indoor and the outdoor models have an integrated 2.4GHz radio which can provide Wi-Fi connectivity as well as easy setup and management using the same device.

• Reverse power feed for powering remote rooftop converters and backhaul
• Powerful and affordable Cloud-controller
• Integrated 2.4 GHz Wi-Fi radio simplifies remote management of rooftop units and allows providing Wi-Fi access using the same device for your customers
• Up to 15 slave converters can be connected to a master device for sharing the
•   gigabit connectivity throughout the building

Product Specifications

• Highest Performance PHY Data Rates:
      Up to 2Gbps PHY rate   

       Supports all G.hn basebands: 25, 50, 100, 200MHz

• Reliability and Robustness:
      LDPC forward error correction provides enhanced FEC over all wire media
      Automated PHY block level error detection and retransmission
      Enhanced selective repeat ARQ based ACK for improved integrity in noisy channels
      Robust communication Mode for high noise environments
• Security:
      128-bit AES CCMP encryption
  

       End to End encryption pair wise keys
      Strict authentication rules

• Enhanced Hardware Support
      Enhanced Traffic handling
      Hardware packet inspection for IPv4 IGMP snooping and IPv6 MLD
      >Hardware based Bandwidth limitation
      8 levels of packet prioritized QoS
      Power Management
• Available Interfaces:
      1000Base-T Ethernet
      G.hn 2 Gbps coax PHY with F-type female connector
• Wi-Fi Features:
      Supports Service Provider and Enterprise type networks
      Stand-alone or Cloud-controlled operating modes
      Bridged AP WDS mode
      802.11b/g/n, 2x2 (2.4GHz)
      Supports up to 8 SSIDs per radio
      IEEE 802.11e Wi-Fi Multimedia (WMM-QoS)
      WPA, WPA2-PSK, WPA2-AES, PSK and Enterprise
      Admission control by client MAC address
• RF Performance (TX): 2.4GHz: 25dBm @ 6Mbps, 18dBm @ 300Mbps
• RF Performance (RX): 2.4GHz: -90dBm @ 6Mbps, -72dBm @ 300Mbps
• Antenna Indoor: 2.4GHz 3 dBi omni-directional
• LEDS: Power, Wi-Fi, Ethernet, G.hn
• Indoor Operating Temperature:
      Temperature rating 0 to 50 C°/ 32 to 122 F
      Store temperature -40 to 70 C°/ -40 to 158 F

      Mounting options: Wall

• Dimensions: Indoor: 131 x 26 x 100 mm/ 5.16 x 1.02 x 3.94 inch
• Weight: Indoor: 220 g (0.48 lb)
• Power: Operation voltage 12 – 54 V
      Power consumption 6.5 W max
      DC jack (central pin 2.0 mm, diameter 5.5 mm)
      Screw terminal block (5 mm pin spacing) (outdoor model only)
      Power through coaxial cable optional

      Max current 2.5A on coaxial power system

Product Includes

(1) GL-I-1GE-1C-US Bridge

(1) User Manual