Accessories

Designed to work with the Maxxwave NON-PEN, non-penetrating roof mount. This mat serves as a protective layer between the roof and the mount. Simpl...

Product Features Terminal Type LC / UPC Type Duplex

Non-Penetrating Roof Peak Tray Non-Penetrating roof mounts are designed to be used when you cannot mount/drill directly into the roof. Made with a...

N-Female Bulkhead to MMCX-Right Angle Pigtail, RG-316, 15cm, Outdoor.Comes with lock washer, rubber seal and nut

This is highly cost-effective way to connect two SFP/SFP+ devices for short distances, within racks or across adjacent racks. They provide a low po...

The Maxxwave Multi Mode Fiber Patch Cable provides high bandwidth and transmission rates, and supports longer distances at cost effective prices. ...

The Maxxwave Single Mode Fiber Optic Cable provides high bandwidth and transmission rates, and supports longer distances at cost effective prices. ...

This Maxxwave pigtail is an SC/UPC single mode 0.9mm 1 meter product. These pigtails are great for improving your cable management, and giving you ...

The Maxxwave 1RU 14 inch cantilever/server rack shelf lets you add 14 inches of flat storage space to any EIA-310 compliant server rack or cabinet....

This is the pipe clamp bracket system for the Maxxwave outdoor enclosures. Designed to fit up to a 2" diameter pipe.

Maxxwave is at the forefront of copper SFP technology. The new Maxxwave Copper SFP transceiver is a high performance, cost effective module complia...

The Maxxwave MW-APCSG SC/APC simplex adapter is capable of connecting to SC/APC type single mode connections.Product Features Terminal Type SC / A...

Product Features Terminal Type SC / UPC Type Simplex Mode Single Mode

RP-SMA Female Bulkhead to MMCX-Right Angle Pigtail, RG-178, 4 in/10cm, outdoor-rated.Material: Brass

The Maxxwave single-mode 10Gbit SFP+ fiber module enables uncompromised high-speed routing with our new fiber solutions. The modules are small-form...

The MW-1330+SM-20K is an up to 10.7Gbps Single Mode optical SFP+ module 1330nm/1270nm DFB, that works for connections up to 20km.Compatible with Ma...

The MW-1270+SM-20K is an up to 10.7Gbps Single Mode optical SFP+ module with a LC connector, 1270nm/1330nm DFB, that works for connections up to 20...

The Maxxwave MW-FPS-40 is a 40mm splice protection sleeve. Its designed to provide vital protection at the juncture between two fusion spliced fibe...

The Maxxwave Single Mode Fiber Patch Cable provides high bandwidth and transmission rates, and supports longer distances at cost effective prices....

Non-branded RB450 Series CaseNew Version - Now with offset brackets and clean front (no case screws)Shown with optional RB450(G), not included.Prod...

The Maxxwave MW-FPS-60 is a 60mm splice protection sleeve. Its designed to provide vital protection at the juncture between two fusion spliced fibe...

The Maxxwave 2RU 19 inch Vertical Wall Mount Rack Bracket provides a cost effective and space saving solution for your IT and AV equipment. Include...

The Maxxwave 4RU 19 inch Vertical Wall Mount Rack Bracket provides a cost effective and space saving solution for your IT and AV equipment. Include...

AC Power Supply for RouterMaxx 10 Port Gigabit Router - PSU - MW-RM1110F-L4This power supply only works with MW-RM1110F-L4 AC Input: 100-240Vac, 5...

This Maxxwave pigtail is an LC/UPC single mode 0.9mm 1 meter product. These pigtails are great for improving your cable management, and giving you ...

Product Features: 350 Mhz Category 5E Patch Cord (UTP) 4 Twisted Pairs 24 AWG Type: CM EIA/TIA TSB-40A ETL Verified 50u" (Short Gold Pla...

The new Maxxwave Fiber Module is designed to enhance performance and bandwidth of your network appliance.Product Features 2-port 10GbE Fiber Module...

This is a kit of Maxxwave 1RU Rack Rails for the Maxxwave Vengeance 3. The rack rails feature extendable arms so you can access your Maxxwave Venge...

This Maxxwave CAT5e cable is comprised of 24AWG copper twister pair conduits, and is rated for 350MHz. It's RoHS compliant and has molded strain re...

CAT5e 350MHz RJ45 Cable 350 MHz Category 5E Patch Cord (UTP) 4 Twisted Pairs 24 AWG Type: CM EIA/TIA TSB-40A ETL Verified 50u" (Short Go...

Maxxwave N-Male to N-Male patch cable 3 feet (1 meter) high quality RFC240 outdoor-rated cable

Pole clamp for mounting enclosures - stainless steelFits a pole/mast up to 2.24inch in diameter. Band width 1/2inch.Made with pride in the USA!

The new Maxxwave Fiber Module is designed to enhance performance and bandwidth of your network appliance.Product Features 4-port 10GbE Fiber Module...

DIN Rail Mounting ClipBlack48mm widthRoHS

Input: 100-240VAC 50/60Hz 0.65AOutput: 24Vdc 1000mA 24WType: SwitchingNorth American PlugModel: LY0245PS-240100UVPart No:18POW-R

SMA Female Bulkhead to U.FL Pigtail, RG-178, 4 in/10cm. Material: BrassComes with brass lock washer and nut

CAT5e 350Mhz RJ45 Cable 350 MHz Category 5E Patch Cord (UTP) 4 Twisted Pairs 24 AWG Type: CM EIA/TIA TSB-40A ETL Verified 50u" (Short Go...

The new Maxxwave Fiber Module is designed to enhance performance and bandwidth of your network appliance.Product Features: 8-port GbE Fiber Module ...

Colors may vary. These super-adhesive ABS plastic PCB stand-offs will make your MikroTik RouterBOARD or any other PCB mount to just about anywhere...

IgniteNet ICC-POE-AT-24V is a simple plug-in device that will connect your af/at PoE switch to any passive 24V device. At its core, the PoE Convert...

The new Maxxwave Copper Module is designed to enhance performance and bandwidth of your network appliance.Product Features 2-port 10GbE Copper Modu...

This is a J-Bracket mounting bracket for the Ignitenet MetroLinq Terragraph line of radios. Product Includes(1) J-Bracket(2) Large pipe clamps(1) S...

This is a 90W PoE Injector for the IgniteNet MetroLinq Terragraph series. Product Specifications Power: 90WProduct Includes(1) 90W PoE Injector for...

IgniteNet PoE Injector is a replacement 24V Passive PoE injector for use with the IgniteNet Spark line, SkyFire line, and MetroLinq line.This repla...

The IgniteNet PoE Injector Passive 48V can fit into most deployment environments, not only providing network extension but also supplying an altern...

This IgniteNet bracket tool is designed to maximize the distance of your MetroLinq radio, and its offset design allows you to fit more radios on yo...